Taking the Cologne V6 out.

Last Saturday was engine out day for a friend's poorly Cologne 2.8i (with early EFi setup) in his early 1971 Cortina Mk3 GXL. After a rebuild oil pressure was lost, possibly by the faulty NOS oil pump so the engine came out and he'll inspect. I guess we'll put it back in next year.  It was sitting on 2.3 mounts and mounted to a V6 HD Type 9. First things first we started with an EPIC bacon buttie, loads of crispy bacon with a slice of fried bread in between and a mug of coffee.

Joe had done a really nice job on the instal and consequently everything came apart without too much fuss, manifold lower bolts were the only awkward ones to access.

The inlet had to come off to disconnect the injectors as the multi plug was cut and soldered during installation due to bad contacts in the plug but with three of us there we soon got everything disconnected.    

We didn't start work until around 2:00pm so were losing daylight by this point, tea breaks included we managed to get it out in about 4hrs but by this point I thought we'd have to re-bolt the mounts and drop it back to alter the straps which we had tied off bit long. You need to give yourself enough room to get over the slam panel. When securing the hoist it's worth having the handle on the balancer the other side as it makes turning it easier I think. 

Things I learnt; You need enough clearance for the slam panel so dont tie the straps too long, you can get a v6 over the slam panel the last couple of inches (using actual muscle power rather than the crane) but my back now tells me cologne engines are HEAVY. Possibly the finest lesson; Joe's Mum makes the worlds best bacon butties, but future bacon sandwich testing will be required (and appreciated!!!) to confirm this as fact.

On the way home my high-beams failed, I cleaned up all the contacts and the earths and which appears to have helped.

Cortinas & Zombies. Artwork again.

What would be cooler than driving a V8 Cortina in a Zombie Apocalypse, if your companions were a samurai sword wielding girl and a AK47 toting chimp with a penchant for chain smoking cuban cigars? Not much that's what! 
South westerners might notice Bristol's Clevedon suspension bridge in the background. Does any of this make sense? Not really! But I had a laugh painting it.

Incidentally I drove my mates V8 engined Cortina last weekend and I'm still on a high from it, so much was the case I didn't even take a video or any photos at the time. What a total cop out.. I'll have to arrange another trip out. I have ran a V8 before & I enjoyed the sound and the torque of it but now I can see what the fuss is about, yes a V8 Cortina is something I need now. I might have to put that idea on hold for a few years though, it looks a much bigger (expensive) job than the V6 conversion which I already have mounts for.

Here's the bay this past summer. It's now got Edlebrock Rocker covers and associated fitting kit from the states, also an oil catch tank for the breather. I used to clean the breather fire trap out on mine every few months and it felt like it went a lot better afterwards but Joe's system is better.

Making the engine mounts / bellhousing adapter is a skilled job that I'd struggle with.

I did try on some wheels while we were outside, but they were a bit wide for my ride. They did look cool, offset has a bit more poke on the front of the Mk3 so I am guessing with my old boaty suspension it'd be catching tyres.  Odd thing is they looked fine on Joe's car but his is lowered by an inch so maybe that makes it look better (it is parked on a hill in this pic so leaning quite a bit the opposite way and opening up the arch gap..) He's having the Atlas narrowed so he can get some 8 inch wide rims on the back which we agree will look awesome.
Main things is I do want some new tyres, mine have plenty of meat on them but they are a bit old. I'll be putting some new rubber on the spare set of wheels I have when I've saved a bit more.
Weather has been frigging lousy again for working on cars this week its proper bitter outside so tools are like ice cubes at the moment. Winter has officially set in. As mentioned previously I'll get some pics up of the past couple of jobs at some point. 

Anyway.. Here's a couple of the characters from the Zombie painting so you can see how they are sketched and painted.

Sketch then inked

 Colour & Tone

Some more artwork.

I seem to have had a really busy few months and just had very little time to do anything for fun but I managed to get on with some more art this last week.

As far as my real Cortina; I need to take some photos of the last few jobs I have done, the weather has been pretty bad so I haven't taken any photos or had to abandon work when the rain starts hammering down. I'll update hopefully over the weekend. 

More artwork 2000E & 1600XL estate.. And a new Steering Wheel

2000E Saloon

1600XL Estate 

Here's a couple more.  I braved the wind and the rain at the classic car show in Malvern last weekend I didn't buy anything at the autojumble though as it was very mini orientated, which is fine as I like Mini's, but I prefer looking around spares which I could use.  There was good reason to be inside too the rain was lashing down and most people went home early.  My mate followed me back in his Savage (it's a damn site easier leading a Savage than trying to keep up with one). My wife joined me, which was good of her considering it could have been an incredibly boring day for her sat in a wet field all day, as it turned out there was a flea market on the other part of the site so we trudged around there, most of the car show guys seemed to be in there so it was fairly packed.  There was some nice bits and bobs but I felt everything was a bit overpriced.

Anyway here's some shots from the day, I was walking around with a ladies umbrella trying to avoid getting my camera phone wet.

What the picture doesn't show is the mud puddle outside my door. I fitted a new carpet the day before the show (will upload some pictures soon) tried hard not to cover it in mud. Luckily the whole show ground has a good tarmac network or the place could've been churned up when everyone left.

I didn't get to speak to many people as the rain was torrential we all dashed for cover and found our own entertainment in the crowded halls. Above though is my mate Steve's GXL in Tawny which he's freshly restored. Last time I saw it it was in his garage being restored, it looked cracking as the paint is like glass. Phil and Kev made it to the show too coming all the way from the Isle of White, that's dedication for you!

I've always liked Macks or Kenworths but this was a nice big GMC something-or-other, it sounded the dogs bollocks.

I remember working for a haulage company that primarily ran ERFs to haul animal feed many years ago.  The job didn't seem like great fun at the time because I was young and daft and didn't much like getting out of bed to drive for an hour to work in the morning but I have some pretty good memories of the place really so whenever I see an ERF I always remember back.

One of my favorite cars at the show, yheeea it's a million miles from a Cortina but I remember seeing this "Catalunya" Clio V6 Trophy replica on the net before.  It appears to have the correct wheels too which are apparently very hard to find now. I would love a clio V6 one day, I even came close to buying one a few years ago but we bought another house instead and I no longer had the required funds.. That plus the £1k cambelt/water pump change every five years would have left me reeling.

A bit of 80's tat.  In all fairness I love the old metros either A series engine, like this one, or K series like my old one.  I learned to drive in a metro, they are probably not quite as good as other euro hatches of the same sort of era but I love em. 

This guy was a star, I caught him eating his butties in the rain.  That's a proper car enthusiast right there!

This was my favorite car of the show, it's a Rambler Rebel (I think?). I have never even heard of these before, I though it might be Australian or South African maybe? It was very cool though, bench seat interior.

This old Commer was really really nice. They looked like Craiger five spokes under those half arches.

A great coach built Mk1 Transit, I always preferred the flat nosed Mk1 but I think some how the font end suits this camper better.

A British Telecom Moggy Minor... see previous posts for an arty Corty version  

This Mini gave me a few ideas for a paint job, it looked like it'd be a right laugh around a track. There were loads of Mini's there.  Honestly I have a hankering for one at the moment.

ASTRALI SUCESSOR II STEERING WHEEL 

I recently purchased one of those old skool Astrali steering wheels which were popular in the 70's.  These wheels are a bit different to the Mountney universal ones which require a hub adaptor.  These old Astrali wheels are manufactured with the hub attached, like the original steering wheel fitted to the car, so the Cortina Mk3 ones are quite rare now as they are spaced quite specifically so your hands don't collide with the dash while turning the wheel.

Unfortunately mine did not come with the center cap and these are not very easy to find now. Fortunately I read a post on a mini forum where Classic Mini Bits of Bradford had posted a reply saying they had one spare.  The trouble was the thread on the forum was a couple of years old... they couldn't possibly still help could they? I got in touch with them, within a few moments I had a photo and measurements of the used part and about 48 hrs later the part was in my hands! It cost less than a tenner including postage too! Now that is what I call service.  It almost made me want to go out and buy a Mini! So if anyone wants anything Mini related I recommend you give them a shout first.

Anyway back to the wheel.. It came with an Austin Rover badge so I set about designing a more Cortina related replacement.  I found a picture on the internet of a Mk3 "coke bottle" GT badge and re-drew it so it was nice and crisp and circular at the 28mm needed to fit the recess in the center cap. 

Chop chop.

All cut out and fitted, I was pretty damn chuffed!

Cortina Offroader

Cortina pickup 4x4.  I've always liked practical vehicles like pickups, vans etc, I sold my Land Rover Defender V8 earlier in the year and still miss having something you can just drive anywhere without a thought given to the paint finish or parking dents, it was liberating in many ways.  Rather than planning trips to the far reaches of Mongolia the most adventurous excursions I made were to the builders merchants or dropping off rubble at the local tip which was partially why I bought it. Or at least I bought a knackered house first which eventually necessitated it's purchase. On numerous occasions it'd carry so much crap to the tip or back from the builders yard it seemed a journey across Mongolia would have been less arduous for it.

Anyway I have seen a few Cortina P100 pick ups that have been modified, I find them quite appealing so wondered what a Mk3 Cortina would look like with a 4x4 makeover.

In terms of work on my Cortina I haven't done a lot.  I seem to have been working my arse off, if only I was earning enough to show for it! So my apologies for the lack of updates.
I mentioned a while back that I am now going to fit the pinto. I am having difficulty making a decision about what to do. I want to convert to EFi and can go one of two ways; either buy a whole engine with efi, loom and ecu (easier and probably cheaper in the long run) or I buy the injection head ecu, loom and efi inlet manifold separately and convert the 2.0l I have.  Also looking to collect/have made other things like injection fuel tank (need swirl pot and pump) and get my head around the wiring. Alternatively I instal the engine as it is and then inject in the future once I've collected the bits. 

New art, BT van and Bakkie

Well I've been on holiday (by holiday I mean working on the house) although I did get the chance to have a few days out in the car and enjoy a few beers with my dad all of which meant I had no time to do any artworks.  Anyway, I've drawn a bakkie, which I think was a South African pickup version of the mk3 Cortina, I dont think we ever got this model over here in the UK but we definitely did get the Cortina MK5 based P100, I know I would like to own one some day.
I love practical vehicles, one of the best things about my old land rover was that I could pick up junk when I go skip diving or scavenging wood for the log burner but primarily it was used for collecting building supplies. Sadly the Cortina isn't a load lugger or at least I'd rather not use it as one.
The other drawing this week (I've done a couple, if anyone who reads this is feeling neglected of Cortina artwork updates) is a British Telecom van. I remember when their vans were this colour (do you remember Buzby too??) technically the Cortina MK3 would not have been used during the time this logo was used (I guess 1980 ish?) It would have been in GPO livery instead but I prefer the old British Telecom look, it's a bit of nostalgia for me.
The other thing is that I like the look of the original 4.5" x 13" steel wheels in black with the hubcap, kind of have an American police car look to them, so now I'm thinking of getting some skinny 165/80/13 tyres and going with this look on my car for a while.

  




    

Better late than never..

Cortina V8 wagon

MK1 Nationals Stratford

Well there wasn't any time for an end of the week drawing as I was working hard finishing jobs on the house so I could get the weekend off to visit the Mk1 Cortina nationals over the weekend.

It's around a 2 hour drive from my place and entry was £10 which included camping, a goody bag and free food (BBQ) on the Saturday evening! Good eh! 

Naturally loads of Mk1s turned up and a good number of Mk2s.  MTOC did our bit for the Mk3s, a fair number of us had made the trip it was good to meet up with the usual characters and get introduced to a few more. Cortina folk are some of the best kind of people. I digested loads of technical advice which was offered by folk who know far more than me and my brain was bursting with ideas by the end of the weekend.

Lots of beer was consumed, some of it was part of our prize in the quiz, where my general knowledge was at best vague and my input beer addled. 

This was only my second overnighter at a car show, thankfully my mate lent me a tent so I wasn't sleeping in a cold car all night this time! I really should buy a tent. In terms of venues I think the site and the management is perhaps one of nicest shows I've been to in a long time and well worth putting in your Cortina calender.